Corbels and Brackets

At Custom Curved Mouldings we use our CNC equipment to build highly detailed custom made corbels and brackets.

We can construct most any shape and size corbel in nearly any wood species required, as well as in PVC and MDF.

We can work from photos and/or sketches of existing corbels for reproduction and historical restoration or directly from architectural drawings when supplied.

These are a few of a larger group of reproduction Victorian corbels we made for restoration work on a building in Woodstock, CT. Made in upper/lower sections that were brought together during the construction process they are accurate reproductions of the original corbels on the building. The reverse grain direction construction on the lower section will allow these to last for generations to come.

Custom Made Mahogany Corbels

The outer two corbels are reproductions to replace time damaged building details.
The center corbel was made from an architect’s drawings.

Maple Corbels

This is one of a pair of solid maple corbels that were used as end supports on an intricate kitchen range hood system.
They are 21″ x 21″ x 4″ thick.

PVC Corbels

Custom made PVC Corbels made to match customer specifications.

Bar Front Corbels

The architects design for this particular bar called for corbels placed every 12″ on center. The tops of these decorative support brackets holds up the front edge of the bar top.

Maple corbels with a light stain.

Maple corbels and bar top front face.

Completed bar system with maple corbles and rail edges. Natural unstained maple is used for the top surface of the bar.

Mahogany Corbels

These mahogany corbels were used in an application similar to the one shown on the bar above.