Radius PVC Mouldings

At Custom Curved Mouldings is now also the source for your radius PVC molding requirements. We use our experience with radius wood moldings to supply you with the highest quality radius exterior PVC moldings.

There are a number of methods we can use to produce your PVC moldings. In this case the 36″ half circle was cut from 4×8 sheet stock and then the profile was applied with our radius moulding machinery.

Other situations my be better suited for heat bending an existing PVC molding to shape in our specially designed PVC bending oven. Either way we can assure you receive a high quality, precisely designed and constructed radius PVC moulding.

Contact us with your required specifications and we will promptly provide pricing.

From the pictures above you can see how we were able to duplicate the moulding profile so the reproduction PVC half circle is an accurate match to the original.

The left hand photo above shows the original mouldings that needed to be reproduced. The right hand photo shows our reproduction PVC moulding sitting on top of the original pine half round.

This photo shows a close-up of a replacement PVC keyblock.

It accurately matches the original right down to thickness and side taper angles.

Radius PVC J-Channel

J-channels are now widely used with many different types of siding. There is always a problem though with how to wrap arch top openings with a proper J-channel.

At Custom Curved Mouldings we can produce custom curved J-channels for most any shape curved door, window or other opening.

In the photos below you will see some of our PVC J-channel half round exterior mouldings. The half round moulding pictured to the right has a J-channel to receive siding on the outside of the curve and a 1/8″ x 1 1/2″ recess on the back inside of the curve to accommodate a window nailing flange. The nailing flange recess allows the PVC half round moulding to sit flush on the exterior sheathing. 

Contact us for pricing on making a custom PVC or wood J-channel molding for your installation.

Click here to learn more about our curved PVC J-Channel mouldings

This photos shows a 36″ diameter x 5 1/2″ wide PVC full circle jamb.

This PVC moulding is being installed as an oversized porthole window in a long PVC sided exterior divider wall.

This photo shows a pair of recently completed PVC Corbels.  

We use our years of experience producing corbels and brackets out of wood to assure you receive the hightest quality PVC corbels.