[HOME]
B.H. Davis Company

CURVED MOLDINGS

PRICING AND ORDERING INFORMATION


Every one of our curved moldings is custom made to the customer's specifications. Given the wide range of curve shapes,  moulding profiles and wood species available it is not feasible to maintain a stock of "ready to ship" curved moldings.

We have dealers in several areas around the country and it can be to your advantage to work with one of them. They have experience in the ordering process so know what information is needed to assure that your moulding "fits" the opening.  Also feel free to work directly with us prior to placing an order through a dealer.



Contact us directly or click below to find a local dealer.

[ DEALER LIST ]



Whether ordering directly or through a dealer, we need very specific information, as listed below, in order to price and/or make your moulding(s).  Among other details this can include exact measurements and/or tracings of the opening(s).  We can often price a moulding prior to receipt of some of these items, but we need to have all necessary information before we can produce and ship your order.

If you are requesting information for a specific situation, you may want to consider including your

NAME, ADDRESS AND PHONE NUMBER

so that we can contact you with questions.  You can also use our ONLINE QUOTE REQUEST which is helpful in guiding you through this detailed process.


Please review the following for more information on what is needed to quote you a price.

1. INSTALLATION LOCATION.

Where is this moulding going to be used? Is it going to trim a window or doorway, or is it for an arched passageway between two rooms. The more we know about where you intend to use the moulding, the better we will be able to help you choose the "right" moulding for the job.   You can find a bief explanation of trim carpentry terms at our "Terminology" page.
 

2. THE CURVE TYPE YOU NEED.

You can determine what type of shape you need by looking at our "Curve Types" page. Typically this will be a half-round, full-round, eyebrow, elliptical etc.
 

3. THE PROFILE SIZE.

We need to know if the moulding is to be 3/4" thick, 1" thick or perhaps some other thickness. Also, is it 2 1/2" wide, 3" wide, 3 1/2" wide or again some other width.
 

4. THE PROFILE PATTERN.

Is the moulding one of the stock patterns shown on our "Profile Pattern Sheets". If it is not a pattern for which we already have knives, then there may be an additional charge for making "custom knives" to match your moulding.
 

5. THE TYPE OF WOOD TO BE USED.

Are you going to paint or stain the moulding?   For paint grade, we usually work with pine or poplar. For stain grade, we will use the species you request.
 

6. MOULDING SIZE.

We need to know the width and height of your moulding. Measure your opening (window, door or passageway), and determine the width of your moulding from inside corner to inside corner. Also, determine the height of the moulding from the bottom of the curve to the inside top of the curve.
 

6. ORDERING AND PAYMENT.

Most moulding orders will require direct communication via telephone to make sure we have all the details correct.  We may also need to fax or email confirmation drawings for your review prior to  making an order.  We typically require a 50% deposit with the balance due COD.  Payment can be made by check, Visa,  Mastercard, American Express or Discover.


Visa   MC   Amex   Discover     

NOTE:  The above, and sometimes additional,  information is necessary for us to provide you with a price for a curved molding.  If you have any questions regarding these details please call (or email us your phone number so that we can call you).  Remember: we are located on the east coast; be sure to let us know where you are so that we can call at an appropriate time.

 

 
 
 





B.H. DAVIS COMPANY
PO BOX 452, THOMPSON, CT  06277
PHONE: (860)923-2771 FAX: (860) 923-3495


Call, fax or email us with
your questions, comments and price quote requests.
[HOME]
[CONTACT]
[SITEMAP]